DVC Machine Shop 1284 South Alpine Street, Cornelius, OR 97113

"I've had them build a few Dirt track motors over the years and they know what they are doing."

"This shop pressure tested, resurfaced and replaced 2 valves on a pair of heads off a 02 montero sport that i was working on. Heads looks brand new when I got it back and after installing the heads the vehicle ran smooth. Guys did a great job, turn around time was about 4 weeks. Highly recommend them they are knowledgeable. 5 star!"

"Had them assemble my ls3 stroker engine. With forged internals from Texas speed. Engine had low oil pressure at idle. Was told 15psi hot was ok. Tore engine down myself to find the issue. The oil diverted barbell was installed backwards with oring on the inside of engine causing internal oil leak. Also #4 main cap installed backwards. Pan bolt stripped out and RTV on the head to hold bolt in. Timing chain tensioner mis installed and came apart. Engine had less than 1500 miles on it. Main and rod bearings completely shot. Have a $7000 paperweight."

"Nice people and exhalent work this is just a couple of motor they help me with thanks Dennis and dave"

"I just replaced the head gasket on my car for the first time. I brought the head in to DVC machine, it was resurfaced and pressure tested promptly and for a better price than a competitor I had checked. Just finished the job, it seems to be running great. NO LEAKS!"