Shaw Industries Plant 20 1020 Riverbend Drive, Dalton, GA 30720

"Great staff very fast Lodging 20 minutes"

"I do not recommending buying from Shaw floors Date Installed: 12-2018 | Date problem(s) Noticed: 6-2020 | Repairs: No stated the following: - The installation started on 1/9/2017 - The oor is installed oating method. - Floor tends to separate at joints in the hallway, living room, and kitchen and he kicks them back together. - Swelled end joints in the hallway, living room, nook, and kitchen. - They use Rejuvenate and Ecosense oor polish to clean the oor. Observations: -2 story house with a paved road and a concrete driveway. - Slab -. - Swelled end joints in Hallway, kitchen, living room and nook were observed. - Gaps- End joints in Hallway, Kitchen, and living room were observed. - From the foyer to the kitchen the oor has some minor dips and raised areas. Within tolerance. - The spacing of plank to the baseboard in the hallway, kitchen, and living room in areas were 1 1/2'' to 2'' wide causing the plank to disengage the locking mechanism. - There are no signs of scratches or abrasions in any area. - There are signs of topical moisture or chemical damage. - No attic stock at the time of this inspection. Applicable Field Tests: Moisture Content: @ 3/4'' depth- 6 %to 7. % | Meter used: Floor-Dot| Non-Invasive Tests Indoor Temperature: 74 | Relative Humidity: 54 % Floor temp- Sunlight-73 / Shade-74 Fahrenheit at oor level. Baseboard moisture- measured 8% Conclusion: - The swelling of the end joints is consistent with Topical moisture and is not manufacturing related. - Gapping- Too much spacing between the plank and baseboard is causing the planks to disengage and separate when walked on and causing the gaps and is not manufacturing related"

"Very expedient. Very nice. Easy to get in and out of. Excellent experience. The guard shack was so nice."