Shuster's / Klosterman Mill

"Private place."

"Shuster's Mill carries the name of Frederick Shuster, who owned the mill in 1883. This large stone and brick structure was built in 1843 by Edward Thompson. He employed Chinese labor to construct the 3 1/2 stories and to build the tunnels. One tunnel supplied the water to the mill from White Oak Creek and another tunnel carried the water from the waterwheel to the tailrace. Edward Thompson built his mill for $2,500. Edward Thompson owned three gristmills in the area. They were called the upper, middle and lower mills. Shuster's Mill was the middle one and was also known as Tunnel Mill. A large waterwheel located in an exterior wheelpit powered the gristmill. Tunnel Mill had the capacity to grind fifty barrels of flour a day and the building had the storage capacity for twelve thousand bushels of grain. Edward Thompson gave each one of his sons, John, James, and William, a mill. In 1883 Frederick Shuster bought the mill and installed a steam engine as an alternative power supply. When the quantity of water was not sufficient to drive the mill stones, he would switch over to steam power. The mill building has an unusual configuration. The mill has 4 1/2 stories. The two lowest levels are constructed with cut limestone. Two sides of the 1st level and 2nd level act as the foundation against the dirt hill. The 3rd, 4th level and the loft have an exterior covered with red brick. The roof is covered with tin. The mill still stands as an impressive structure. Its design is also unique because each of the three lowests levels have access for grain wagons. The 4th level has doors at the entrance and in the rear of the mill to hoist the grain to the upper levels. The photograph shows the mill from the rear. There is no longer any equipment inside the mill. It appears to be used for storage. Most of the 6 over 6 double-hung sash windows are gone. There is a large wooden waterwheel pit on the north side of the mill. The historical records indicate that there was a large waterwheel inside the building, the exterior wheel well indicates an exterior waterwheel was used. This mill would be ideal for reconstruction. Although there are some severe cracks in the front of the building, it appears in good condition. The uniqueness of the water tunnels and the peculiar construction combining stone and brick would make this a fascinating reconstructed old mill. While touring the old mills of Ohio, don't miss Shuster's Mill (Garber; Seidel). - - - Work has already been completed which includes the restoration of the brick around the windows, stone foundation repaired and floor beams, columns and boards have been replaced. Ken Klosterman has invested significant amount of time to learn about the history of Shuster's Mill and he is using his research to make sure the Mill can be restored as it was in the late 1800s. Mr. Klosterman's team has also learned about the history of the Mill and the historical impact of their restoration project. Each individual working on the Mill project is highly informed of the history and the implications of their work with such artifacts."